<![CDATA[www.123playandlearn.com - Valentines Day Cards]]>

<![CDATA[www.123playandlearn.com - Valentines Day Cards]]>Thu, 12 Mar 2026 05:57:37 -0700Weebly<![CDATA["Here's Looking at you Valentine" Card]]>Fri, 14 Feb 2014 02:01:07 GMThttps://www.123playandlearn.com/valentines-day-cards/heres-looking-at-you-valentine-cardOutside of Card

Inside of Card

Supplies Needed; Wiggly eyes, markers or crayons, glue, scissors, a large hole punch, and construction paper.

Directions;
Cut construction paper to desired size for card. Punch a hole in the middle (or off center) of the card. Write on the front of the card, you can use one of the examples (seen above) or you can make up your own. Inside the card, glue on the wiggly eye, so that it appears to be looking out of the punched hole. On the inside of the card, draw a monster or creature around the wiggly eye.

]]><![CDATA[Easy Valentines Day Pencil Toppers]]>Fri, 14 Feb 2014 02:00:58 GMThttps://www.123playandlearn.com/valentines-day-cards/easy-valentines-day-pencil-toppers1

Supplies Needed; Pencils and pipe cleaners

Directions;
Twist pipe cleaners to make cute pencil toppers that can be distributed to students on Valentines Day!

]]><![CDATA[Valentines Day Friendship Bracelets]]>Fri, 14 Feb 2014 01:57:11 GMThttps://www.123playandlearn.com/valentines-day-cards/valentines-day-friendship-bracelets

Here is an easy one. We braided yarn and made bracelets, then colored and hole punched the template (seen below), then threaded the bracelet through.

]]><![CDATA[Easy Valentine Table Play (Tic-Tac-Toe)]]>Mon, 10 Feb 2014 04:28:11 GMThttps://www.123playandlearn.com/valentines-day-cards/easy-valentine-table-play-tic-tac-toe

Supplies needed; Print out of template (below), M&M Candy, and a stapler

Directions; Print out template (below), and cut out each game. Staple 1 bag of M&M Candy to each game.

]]><![CDATA[Ninja - Chocolate Bar Valentine]]>Sat, 08 Feb 2014 22:43:19 GMThttps://www.123playandlearn.com/valentines-day-cards/ninja-chocolate-bar-valentine

Supplies Needed;

Chocolate bar
Construction paper: black and white
Black marker or Wiggly eyes
Red glitter glue

Directions:

Cut a rectangle of red or black Construction paper that wraps around a chocolate bar and overlaps itself by about 1/2". Don't glue yet - set the chocolate bar aside.
Cut out a long, skinny rectangle for the arms. It should be about 1" shorter than the width of the wrapper you just made. Also cut out two simple hands and a rectangle for the eyes out of white Construction paper.
Glue the hands to the ends of the arm piece. Cut a rectangle for the face out of the wrapper, then glue the small white rectangle behind the hole. Make two dots for eyes with the black marker or glue on wiggly eyes. Wrap the chocolate bar with the face/body wrapper and glue it shut. Glue the arms to the back so they stick out of the sides. Add a heart to the ninja's chest and adorn with glitter glue.

]]><![CDATA[Glow Stick Valentine]]>Sat, 08 Feb 2014 21:03:37 GMThttps://www.123playandlearn.com/valentines-day-cards/glow-stick-valentine

Supplies needed; Glow stick bracelets, print out of template (below), scissors, and a hole punch

Directions; Print out template. Cut out each individual card. Use hole punch to place 2 holes over the "X" at top and bottom. Thread glow stick through holes.

]]><![CDATA[Cookie Valentines]]>Sat, 08 Feb 2014 00:25:05 GMThttps://www.123playandlearn.com/valentines-day-cards/cookie-valentines

Supplies Needed; Cellophane, cookies, pipe cleaner, print out of template (below), scissors, and a hole punch.

Directions, place cookies in cellophane and use pipe cleaner to cinch at top. Cut out templates, use a hole punch to puncture a hole at the top center. Thread pipe cleaner ends through hole. Twirl or tie off pipe cleaner to endure that template does not fall off.

]]><![CDATA[Minion (Twinkie) Valentine]]>Thu, 06 Feb 2014 18:35:55 GMThttps://www.123playandlearn.com/valentines-day-cards/minion-twinkie-valentine

Supplies Needed;
Twinkies, black construction paper, blue construction paper, wiggly eyes, tin foil, glue, scissors, Hole punch, and Large hole punch

Directions;
Cut a rectangle out of blue paper and wrap it around the bottom of the twinkies to make the minion's overalls. Then cut a black strip of paper and glue it on the top to resemble their goggles. Stamp out circles of tin foil and tape them to the black strip. Next add some big wiggly eyes and decorate the overalls.

]]><![CDATA[Bee Mine]]>Thu, 06 Feb 2014 16:16:41 GMThttps://www.123playandlearn.com/valentines-day-cards/bee-mine

Supplies:
·         Construction paper- yellow and black
·         Heart tracers
·         Glue
·         Scissors
·         Googley eyes
·         Markers

Directions: Trace and cut out 4 yellow hearts and 2 black hearts of the same size. Trace and cut out several small black hearts and 2 black antennas. To create the bee body glue together in order slightly above each other yellow heart, black heart, yellow heart, and black heart. Add a yellow heart to each side with the point of the heart being glued to the back of the bee body for wings. Glue a few smaller black hearts onto front of each wing. Glue antennas to the first yellow heart. Glue googley eyes to front of the first yellow heart. Use markers to add other details and a special “Bee” message. We used the messages “Bee Mine” and “You’re Bee-tiful”.

]]><![CDATA["Hug" Valentine Card]]>Fri, 17 Jan 2014 23:47:14 GMThttps://www.123playandlearn.com/valentines-day-cards/hug-valentine-cardThis project would be perfect for deployed military parents or family members and friends living far away.

Supplies Needed; Print out of template (below), red yarn, red construction paper, glue, hole punch, and scissors.

Directions; Using the red construction paper, fold it in half and trace child's hands (using a pencil). Cut out the hand outline (the fold will allow for 2 hand shapes to be made). Use your hole punch to put one hole in the palm of each hand. Next take the red yarn and measure the child's "wingspan" (from palm to palm, across their chest). Print out the template (below) and decorate as desired, once decorated, use the hole punch to put two holes in the top of the decorated template. Now thread your "wingspan" yarn through the decorated template, and through the holes of each hand and glue ends to back of palm. Allow to dry.

]]>